电话:0573-82721177
传真:0573-82720300
TN-1型粘结剂

DZGR-FZ-130
TN-1 Bonding Agent
TN-1型粘结剂

TN-1型粘结剂系特殊单组份、无溶剂型聚氨酯粘结剂,基本成份为聚醚、添加料、阻燃剂、助剂等。固化后,粘结剂不溶,防水性能极佳。

TN-1 bonding agent is a special mono-fomluate and non-sdlvent bonding agent whose base ingredients are polyether, addition materials, fire retardarts and auxiliary agents, etc. It has no irritable smells, toxic free and can be applied under normal temperature. The brush coating or spaying of this agent is convenient with a long-lasting effect. The brush coating or spraying of this agent is converient with a long-lasting effect. The bonding agent can solidify under normal temperature, after which it is not dssolvable in water, showing excellent waterproof performance.

使用方法Usage

  • 表面处理,应先清除粘结面上的油污或灰尘。
  • 涂胶:采用单面上胶法,用锯齿式刮刀或喷涂设备将胶涂均匀地涂布在基面上。
  • 贴合:将要粘巾的材料,铺放在涂胶的基面上,粘贴后可不加,若稍许加压粘结效果更好。
  • 固化:在25℃,RH为100%(湿度),在4小时内即可达到粘结强度,以特殊加工后,冬天也能达到同样效果,常温下24小至48小时即可使用。
  • Surface treatment: the oil stains or dust on the bonding face shall be first removed.
  • Application: adopting single face application method. Use a toothed scrapper or spraying equipment to homogeneously apply it onto the base.
  • Bonding: put the material to be bonded onto the base with the bonding agent.
  • No pressure after bonding is allowed, but a little pressure will help can be reached after 4 hours at 25℃, RH 100% After special processing, the same effect can be reached even in winter. Under normal temperature, usage is allowed after 24 to 48 hours.

技术参数Technical Parameters

项目Item 数据Date
外观Appearance 浅黄色或褐色粘稠液Light yellow or brown viscous fluid
密度Density 1100~1200 kg/m3
粘结强度Bonding strength 剪压强度:≥2Mpa Compressive and shear strength:=2Mpa
粘度Viscosity 3000~20000厘泊 3,000-20,000CPS
适用温度Applicable temperature -196°C~+250°C
耐碱度Acid-alkali degree PH值为6-8PH Value is 6-8